Electro-Rail Tie Rod Hanger #ERS-150

Electro-Rail Tie Rod Hanger 

Part Number - ERS-150, S14038B, FRS-150

Allows direct attachment of 3/8" tie rods at any point between track joints. Permits easy leveling of track sections. When used with curved track, field notching of track top flange is required for clearance of clamping bolt.

• Item: Hanger (for tie rod)
• Note: Minimum of two track hangers required for each straight track section
• For: FRS100 & FRS200 Series (Feedrail^®) Track
• For: FRS300 Series (Plug-In Service)
• Track Accessories - Track Hangers