Skip to product information
1 of 1

ALL STEEL STANDARD NEEDLES tagging gun kit for dennison D10651 4 Needles in each

ALL STEEL STANDARD NEEDLES tagging gun kit for dennison D10651 4 Needles in each

SKU:

Regular price $9.99
Sale price $9.99 Regular price Market price:
Sale Sold out
Shipping calculated at checkout.
Quantity
Delivery within 3-5 working days
View full details
  • Description

LL STEEL STANDARD NEEDLES tagging gun kit for dennison D10651 4 Needles in each

Needle Kit Standard All Steel

Will Work With Dennison Or Goldstar Tagging Gun (GS-60S)

GS-08913

For All Regular Dennison Style Tagging Guns

4 Needles in each Pack

These needles are the same as the Avery Dennison 08941, but are all steel for more

heavy duty use.

These are the highest quality needles and will work with the Avery Dennison 10651

tagging gun and all other "Dennison style" regular standard tagging guns such as but

not limited to brands like Motex, Laser, Monarch, Goldstar, and Sabre.

The cutting blade is built in to these needles, which means the base of the needle has

a sharp knife to separate the fasteners from their clips. This way, every time you

replace the needle, you get a new sharp knife as well. By doing this, you are assured

the best experience while tagging.

These smooth Dennison style needles are finished to significantly reduce the risk of

causing holes and snags in fabrics.

Please Note:

- These needles are for use in a regular tagging gun.

- These needles will NOT work in a fine tagging gun

4/pack

JUKI DDL-8700 FAQs

What kind of needles do you use in the DDL-8700?

The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.

Where does the machine oil go?

A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.

What kind of oil does this machine require?

You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.

What size table can I get with this machine?

Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.

Does the DDL 8700 make buttonholes?

No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.