Skip to product information
1 of 1

goldstar Vary Form Curve Rule 12" Solid aluminum construction * 1/8" calibration

goldstar Vary Form Curve Rule 12" Solid aluminum construction * 1/8" calibration

SKU:

Regular price $19.99
Sale price $19.99 Regular price Market price:
Sale Sold out
Shipping calculated at checkout.
Quantity
Delivery within 3-5 working days
View full details
  • Description

  • * Solid aluminum construction * 1/8" calibrations * Calibrated on one edge and two sides * The 12" goldstar ® # gs-12c Vary Form Curve rule is especially helpfull to the patter makers when drawing more defined curves of neckline and collar design, sleeve caps, pocket contour, armhole, and more.
  • The Fairgate ® curves are an indespesible tool for the patternmaker , graphic artist , illustrators or anyone who needs to draw or cut smooth curved lines.
  • goldstar Vary Form Curve 12" (1 Piece)

    Draws a wide range of curves by simply turning.Vary Form Curve Practically replaces a set of French curves. Indispensible to the pattern maker and graphic artist.

    Calibrated one edge, two sides

    Model No.: gs-12c

JUKI DDL-8700 FAQs

What kind of needles do you use in the DDL-8700?

The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.

Where does the machine oil go?

A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.

What kind of oil does this machine require?

You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.

What size table can I get with this machine?

Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.

Does the DDL 8700 make buttonholes?

No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.