These needles have a flat side ground on the needle shank to assure proper alignment with the point of the sewing hook. (Intended only for machines designed for Flat Shank needles).
Needle System* : 15X1, HAX1
Also sold under needle style number's : 130/705H, SY2020, SY2031, 206X15, PFX130, canu 22:15
*A needle system is a group of needles made to fit specific sewing machines. All needles in a system are of the same length and shank size, but are of various diameters. Lower size numbers are narrower or thinner needles used for lighter materials. Higher size numbers indicate a needle of thicker diameter, used for heavier materials. Match your needle system to your machine, then the size of the needle to the product you are sewing.
Organ 15X1 needles are available in following sizes. Please select your size :
Singer Size 9 (Metric Size 65)
Singer Size 10 (Metric Size 70)
Singer Size 11 (Metric Size 75)
Singer Size 12 (Metric Size 80)
Singer Size 14 (Metric Size 90)
Singer Size 16 (Metric Size 100)
Singer Size 18 (Metric Size 110)
These are standard home sewing machine needles with a flat shank and a regular size eye for most home sewing machines and home sewer based embroidery and quilting machines including :
Babylock, Bernina, Bernette, Brother, Elna, Happylock, Husqvarna, Janome, Juki, Mammylock, Melco, Necchi, New Home, Pfaff, Poem, Riccar, Simplicity, Singer, Toyota, Viking, White and more....
1800-8684419
JUKI DDL-8700 FAQs
What kind of needles do you use in the DDL-8700?
The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.
Where does the machine oil go?
A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.
What kind of oil does this machine require?
You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.
What size table can I get with this machine?
Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.
Does the DDL 8700 make buttonholes?
No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.