Hot And Cold Auto Cutting Machine - Jema #JM-110LR
Max. cutting width (mm): 95
Voltage: 110v
Power: 0.32/ 0.57
Cold knife: 75mm
Cutting speed pcs/ min.: 95
Cutting length (mm): 0.1-9999
Max. blade temperature: 350 degrees Celsius
HIGH SPEED: 95 pieces can be cut per minute. (Take 50mm length as an example) ACCURACY: Adopt a high-frequency stepping motor drive CUTTING TYPE: Melting and cutting with a hot knife. The woven label is cut neatly without fraying and installed with an anti-static electricity device. AUTOMATIC OPERATION: It works automatically only by setting speed, length, quantity, and temperature. It stops automatically if materials run out during operation. COMPENSATION FUNCTION: After the actual length data is inputted, accurately cut out the length to meet the system settings FAULT SELF-CHECK: Cutting sensor error, no supply, the error code will show on the system panel directly if the fault happened MEMORY: Set length, quantity, and speed are not erased even if power is off and on. APPLICATIONS: Belt loop, bag band, shrink tube, string, elastic band, plastic zipper etc.
JUKI DDL-8700 FAQs
What kind of needles do you use in the DDL-8700?
The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.
Where does the machine oil go?
A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.
What kind of oil does this machine require?
You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.
What size table can I get with this machine?
Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.
Does the DDL 8700 make buttonholes?
No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.