Skip to product information
1 of 9

Hot Wire Styrofoam Cutter Foam Cutting Machine Work Table Tool,110 volt USA SHIP

Hot Wire Styrofoam Cutter Foam Cutting Machine Work Table Tool,110 volt USA SHIP

SKU:

Regular price $99.99
Sale price $99.99 Regular price Market price:
Sale Sold out
Shipping calculated at checkout.
Quantity
Delivery within 3-5 working days
View full details
  • Description

DESCRIPTION:

Specification:

Name

Table Foam Cutter

Voltage

110V

Power

30W

Temperature Range

50-300 ℃

Working Plate

38*58CM

Details:

1) Product Size: 380*580mm

2) The extra wire could be available and replaced.

3) With adjustable temperature, heat up to approximately 300 degrees Fahrenheit under one minute.

4) This foam cutter cut foam, sponge and also cut round shape (Dia.=340mm).With the regulator, the support could adjust 360 degrees to let foam easily to cut. And it could work consistently.

5) Brush to clean the hot wire.

6) Screwdriver to install and remove the wire from the unit.

Package Included:

JUKI DDL-8700 FAQs

What kind of needles do you use in the DDL-8700?

The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.

Where does the machine oil go?

A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.

What kind of oil does this machine require?

You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.

What size table can I get with this machine?

Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.

Does the DDL 8700 make buttonholes?

No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.