This Highest Quality Hemmer Foot is used for Double Fold hemming on medium to heavy weight materials. If your fabric is too heavy for this hemmer foot style, you will need to use a hemming attachment.
This Hemmer Foot has a built in spring that opens the mouth of the hemmer to allow side seams to pass through the foot. If you are hemming across a seam this foot is the only foot that will allow the seam to pass thru the hemmer foot.
This foot style is available in these sizes:
1/8" 3/16" 1/4"
This foot will fit all BROTHER / CONSEW / JUKI / SINGER Style Single Needle INDUSTRIAL Sewing Machines made by:
ARTISAN BROTHER CONSEW COLUMBIA JUKI MITSUBISHI NAKAJIMA REX SEIKO SINGER SIRUBA TAIKO TOYOTA
This High Quality Set will also fit many Home Sewing Machines that use HIGH SHANK Presser Feet. Look at the feet in the photo to see if your feet are shaped the same way. These HIGH SHANK Presser Feet have a Total Height of 1-1/4" . But LOW SHANK Presser Feet have a total Height of about 7/8 ". These Feet WILL NOT fit LOW SHANK Home Sewing Machines .
Never run your machine with ANY Zig Zag with these feet, ONLY Straight Stitch!
JUKI DDL-8700 FAQs
What kind of needles do you use in the DDL-8700?
The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.
Where does the machine oil go?
A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.
What kind of oil does this machine require?
You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.
What size table can I get with this machine?
Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.
Does the DDL 8700 make buttonholes?
No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.