Garnet Series Serger 2/3/4 Thread Overlock With Differential Feed and Rolled Hem
With differential feed and micro safety switch the Juki MO-644D is a wonderful additional to any sewing room. With the Garnet Line of home sergers, a beginner or experienced sewer can create simple sportswear or elegant evening wear with unbelievable ease. Expand your range of design and technique with the easy to operate, durable and dependable Juki Locks.
MACHINE FEATURES:
Color Coded Threading Guides throughout the machine make threading easy and efficient
Adjustable Stitch Length by simply turning the knob inside the machine within the range of 1 -4mm
Adjustable Differential Feed is controlled and adjusted by a dial conveniently located on the outside, left-hand side of the machine
1-Rotation Thread Tension Dials with normal tensions highlighted for simple, consistent tension adjustment
Easy Dial Knife Adjustment makes the upper knife completely self-adjusting
Heavy Duty Knife System operates with dedicated drive to assure consistent and easy cutting of light to heavy weight fabrics
Automatic Rolled Hemming can be created wit built-in finger tip control; there is no need to change the foot or plate
Sewing Light is placed to give optimum lighting to the fabric and needle areas
Multi-Purpose Foot is equipped with a slotted tape guide for sewing woven tape, elastic, sequins and ribbon
2/3 Thread Converter is easy to install and allows 1 needle thread and one lower looper thread for securing overedging
Sewing Width Gauge takes the guesswork out of seam allowances and is conveniently located on the guard cover
MACHINE SPECIFICATIONS:
Sewing Speed: Max 1,500 spm
Number of Threads: 2/3/4
Threads Needle: Household Machine Size 11 or 14
Overlocking Width: Left Needle: 8mm / Right Needle: 4mm
The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.
Where does the machine oil go?
A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.
What kind of oil does this machine require?
You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.
What size table can I get with this machine?
Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.
Does the DDL 8700 make buttonholes?
No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.