THIS MACHINE IS USED FOR MANUFACTURING ROLLS FROM KNITTED RIBBONS. THE WIDTH OF THE BELTS IS ADJUSTABLE, THE FEEDING CAN BE SEMI-AUTOMATIC OR AUTOMATIC
SPECIFICATIONS:
MODEL NAME
MAX. SEWING
THICKNESS
VOLTAGE
FREQUENCY
G.W
NT-911
5.31 IN
110V
50HZ
THIS MACHINE IS WIDELY APPLIED TO ALL KINDS OF SPECIAL EQUIPMENTS SUCH AS CIRCULAR KNITTING, COTTON AND POLYESTER FABRIC. IT'S HIGHLY AUTOMATED. EFFECTIVELY IMPROVE THE EFFICIENCY AND ACCURACY OF CLOTH CUTTING. THE SPEED OF THE CLOTH CUTTING CAN BE ADJUSTED TO YOUR LIKING. IT ALSO CONTAINS A STOP DEVICE. THE FABRIC WDTH CAN RANGE FROM 15-90MM, IT IS THE NECESSARY EQUIPMENT FOR GARMENT MANUFACTURERS ETC
JUKI DDL-8700 FAQs
What kind of needles do you use in the DDL-8700?
The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.
Where does the machine oil go?
A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.
What kind of oil does this machine require?
You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.
What size table can I get with this machine?
Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.
Does the DDL 8700 make buttonholes?
No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.