Powerful cutting motor with ergonomic balance makes it the most popular cutting tool used by all types of professionals. Replaceable octagonal blades can cut carpeting, PVC, linoleum, foam, rubber, leather, cork, and textile fabrics with ease. 60mm 10 Sided rotary blade and carbide stationary blade are a self-sharpening combination. Cuts up to 10 layers of textile fabrics and up to 1/2" (13 mm) of carpeting. Powerful 9.6 volt Heavy Duty motor, powered by a rechargeable NiCad Battery Pack. Industrial, re-usable NICAD battery recharges in less than 1 hour. One hour recharges can cut approximately 800 feet of cloth or 300 feet or carpet on a single charge. For continuous operation, keep a second battery in the charger. Battery pack can remain indefinitely in the battery charger and the full charge will be maintained automatically by the trickle charging circuit built into the charger Light indicates charging is in progress, when light goes out, the rapid charging is complete Cutting unit weighs approx. 1.5 lbs, battery weighs 1 lb, total weigh approx. 2.6 lbs Length: 9.5" without battery, 12.5" with battery, 2.25" wide, 3" tall, 6.5" girth Includes shear with 10 sided rotary blade and carbide bottom blade, rechargeable battery and 110 volt charger.
JUKI DDL-8700 FAQs
What kind of needles do you use in the DDL-8700?
The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.
Where does the machine oil go?
A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.
What kind of oil does this machine require?
You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.
What size table can I get with this machine?
Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.
Does the DDL 8700 make buttonholes?
No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.