SEWING MACHINE ELECTRIC SERVO MOTOR - ADJUSTABLE SPEED 110 VOLT 550 WATT 3/4 HP
by new-tech
Industrial Sewing Machine Electric Servo Motor.
Servo motors use less electricity than standard clutch motors. External speed control allows you to slow down your unruly machine. the motor is silent when the pedal is not depressed.
Great low-end torque and stable speed control
Improved low-speed control
Noiseless motor operation
60% power consumption savings over the standard clutch motor
Variable speed motor control and easy to adjust speed top speed control knob
Used same mounting holes as standard clutch motor
No clutch or brake disk required can turn machine handwheel easily to position needle
Switched internal to 110V standard light bulb socket
110 Volt, 3/4HP , 550 WATTS
JUKI DDL-8700 FAQs
What kind of needles do you use in the DDL-8700?
The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.
Where does the machine oil go?
A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.
What kind of oil does this machine require?
You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.
What size table can I get with this machine?
Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.
Does the DDL 8700 make buttonholes?
No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.