FOOT FOR ALL ? No longer search for the ultimate pants hemmer. Our presser foot set comes in 6 sizes - 1/4",1/2",5/8",3/4",7/8",1"
PERFECT PRESSER TOOL ? This presser foot is the perfect tool for any low shank sewing machine. For any domestic sewing projects, the rolled hem foot helps keep your hem in place without constantly realigning.
PERFECT FOR ALL PROJECTS ? Whether you?re looking for a Brother sewing machine foot or a set of Singer presser feet, this sewing foot kit works for most low shank machines with most materials that fit the sizes.
EASY TO INSTALL ? Our sewing hem foot is super easy to install and with a bit of practice, even easier to use! Simply, click the easy hem foot on to your machine. Roll your hem to the correct size and slip inside the hemming foot slot.
NO#1 SEWING COMPANION ? This hem sewing foot kit is the best accessory to aid in accurate hem binding. We believe our roll hem presser foot set is truly the best in the marketplace and we stand by that. If our hemming foot kit has left you feeling PRESSED, we?ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confidence.
JUKI DDL-8700 FAQs
What kind of needles do you use in the DDL-8700?
The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.
Where does the machine oil go?
A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.
What kind of oil does this machine require?
You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.
What size table can I get with this machine?
Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.
Does the DDL 8700 make buttonholes?
No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.