JUKI MF-7523 3 Needle Coverstitch Industrial Sewing Machine With Table and Servo Motor

MACHINE FEATURES:

No Looper thread Twining
The rotating part of the looper thread camshaft is covered to prevent the looper thread from twining around the looper thread camshaft. A V-shaped thread catcher has been installed on the looper thread cam bracket to easily clamp the looper thread, which is likely to twine around the cam.

Needle Bar Stroke Conversion Mechanism
By changing over the needle bar stroke, penetrating force of the needle as well as thread tension to fit heavy-weight materials (fleece, blankets) can be obtained. The needle bar stroke can be changed by adjusting the eccentric pin. (Changing of parts is not required. Factory-set at the time of delivery: 31mm; for sewing heavy-weight materials: 33mm) Micro-Lifter Mechanism Elastic material or delicate material can be sewn with the presser foot kept slightly raised. This effectively helps reduce the degree of slippage, warpage, and damage to the material.

Stitch Type Change Over
It is now possible to change the stitch type, such as elastic soft-seams for innerwear and high-quality well-tensed seams for outerwear. The stitch type can be changed over (soft-seams/well-tensed seams) simply by changing the thread path.

Differential-feed Micro-adjustment Mechanism
It is possible to finely adjust the differential feed amount to a best-suited value for the material to be used. The differential feed ratio is constant even if the stitch length is changed Feed Dog Inclination Adjustment The feed dog inclination can be externally adjusted with ease. This adjustment mechanism effectively helps improve the material holding ability of the feed dog and prevent uneven material feed and puckering.

DOWNLOADS:

• Instruction Manual - JUKI MF-7523
• Catalog - JUKI MF-7523
• Cautions For Safety - JUKI MF-7523
• Parts List - JUKI MF-7523

U.S. WARRANTY:

90 Days labor on defects in materials and workmanship.

** Head Only option does not include the table, legs, Servo Motor, and LED Lamp. No assembly or residential charges necessary.

DISCLAIMER: DUE TO THE WEIGHT AND SHIPPING METHODS USED FOR INDUSTRIAL MACHINES THEY MAY EXPERIENCE MARRING AND SCRATCHES DURING SHIPPING. THIS WILL NOT AFFECT THE OPERATION OF THE MACHINE.

THE ADVANTAGES OF A SERVO MOTOR:

• They use up to 90% less power than clutch motors
• They are 1/3 lighter than clutch motors
• With a flick of the switch you can reverse motor rotation
• No parts to wear out or adjust.
• No matter how hard you press the foot pedal configured speed remains the same

Because of Servo motor speed control, most users find the machine is easier to use. Both beginning and seasoned sewers find this feature helpful when stitching projects that don't demand high-speed stitching.

PARTS & ACCESSORIES for the JUKI MF-7523

Needles: #UYX128GAS 9S~12S (10S standard)
Oil: Juki New Defrix Oil No. 18 #MML018900CA

COMPATIBLE ATTACHMENTS

PRESSER FEET
3 Needle Coverstitch Binder Presser Foot #94909
1/4" Gauge Presser Foot for 3 Needle Industrial Coverstitch - Pegasus #257301B-64
3​-Needle 6.4MM Gauge Binder Presser Foot For Industrial Coverstitch Sewing Machines
Glide-On Foot For Industrial Coverstitch Sewing Machines #257468T-64
Presser Foot Adjustable Wide Roller Guide for Coverstitch Machine
Industrial Coverstitch Foot with Center Guide, 6.4mm
S537A Coverstitch Sewing Machine Adjustable Elastic Big Guide Foot 6.4MM​

BINDERS/FOLDERS
Coverstitch Collarette Clean Finish Binder #s124B
Table Mount Coverstitch Collarette Binder #S124A
Top Mount Collarette Binder Top Clean Industrial Cover Stitch Sewing Machine
Belt Loop Folder for Coverstitch and Double Needle #S66

GUIDE
Adjustable Cloth Guide Used for 2 or 3 Needle Coverstitch Machine #DAYU205​