​Electro-Rail Track Hanger #ERS-115

Electro-Rail Track Hanger 

Part Number - ERS-115, T11363, FRS-115

Used in place of track hanger FRS-105 where head room is limited. Takes 3/8" diameter bolts. Can be attached to straight track at any point between track joints. Not suitable for curved track.

• Item: Hanger (low level)
• Note: Minimum of two track hangers required for each straight track section
• For: FRS100 & FRS200 Series (Feedrail^®) Track
• For: FRS300 Series (Plug-In Service)
• Track Accessories - Track Hangers