​​​​JUKI TL-2010Q 1 Needle Lockstitch Mid-Arm Portable Quilting and Piecing Machine with Automatic Thread Trimmer and Speed Control​
​​​​JUKI TL-2010Q 1 Needle Lockstitch Mid-Arm Portable Quilting and Piecing Machine with Automatic Thread Trimmer and Speed Control​
More Product Pictures

DOWNLOADS:

MACHINE SPECIFICATIONS:

  • Sewing Speed:  Max 1,500 Stitches Per Minute
  • Stitch Length: Max 6mm
  • Lift Of The Presser Foot By Lever: 9mm
  • Lift Of The Presser Foot By Knee: 12mm
  • Needle: HA x 1 (130/705H) #7~#18 (Hlx5#9~#16) 
  • Dimensions: 452 (W) x350 (H) x219 (D) (mm) 
  • Weight (Machine Only):  11 .5Kg / 25.4Lb
  • Rated Voltage / Power Consumption: 120V/1.4A, 100W
  • Auxiliary Table (Dimensions): 590 x 335(mm) 
  • Hook:  Horizontal-axis full-rotary hook

MACHINE ACCESSORIES:

  • Zipper Attaching Foot (Part No. A9133-090-000)
  • Even Feed Foot (Part No. A9811-D25-0A0)
  • ¼ Quilting Foot (Part No. A9811-E98-BA0A)
  • Auxiliary table
  • Exclusive screwdriver
  • Screwdriver (Small)
  • Cleaning brush
  • 4 Bobbins
  • Oiler
  • Needles
  • Spool cap
  • Sewing machine cover
  • Knee lifter lever
  • Foot Controller
  • Power Cord

OPTIONAL ACCESSORIES:

  • Hemming Foot (Part No. A9104-090-0A0)
  • 1/5" Quilting Foot (Part No. A9811-E98-AA0A)
  • Compensating Presser Foot (Part No. A5140-E98-ZA0)
  • Solid Cording Foot (Right) (Part No. A9844-D25-AA0)
  • Solid Cording Foot (Left) (Part No. A9844-D25-BA0)
  • Hinged Cording Foot (Part No A9844-D25-CA0)
  • Hinged Zipper Foot (Part No. A9842-D25-0A0)
  • Invisible Zipper Foot (Metal) (Part No. A9841-D25-AA0)
  • Invisible Zipper Foot (Plastic) (Part No. A9841-D25-BA0)
  • Smooth Foot (Part No. A9840-D25-0A0)
  • Piping Foot (Part No. A9845-D25-0A0)
  • ¼” Presser Foot (Part No. 40171428)
  • 7mm Presser Foot (Part No. 40171432)
  • ¼” Quilting Foot for Ruler (Part No. 401666729)
  • Quilting Foot Front Open Toe (Part No. 40171422)
  • Quilting Foot Side Open Toe (Part No. 40166734)
  • Echo Quilting Foot (Part No. 40166739)
  • Foot for Thin Fabric (Part No. A9813-096-0A0A)
  • Throat Plate for Thin Fabric (Part No. A9839-090-AA0)
  • Throat Plate for Thick Fabric (Part No. A9839-090-BA0)
  • Quilt Guide for Even Feed Foot (Part No. 40171424)
  • T-Gauge (Part No. A9840-D25-0A0)
  • Sewing Gauge (Part No. A9847-D25-0A0)
  • Foot Controller (Part No. 40144122)
  • Foot Switch Stopper (Part No. 40165358)
  • Knee Lift Lever (Part No. A3425-X28-0A0)
  • Bobbin (Part No. A9851-D25-0A0)
  • Bobbin Case (A9852-D25-0A0)

​​​​JUKI TL-2010Q 1 Needle Lockstitch Mid-Arm Portable Quilting and Piecing Machine with Automatic Thread Trimmer and Speed Control​

​​​​JUKI TL-2010Q 1 Needle Lockstitch Mid-Arm Portable Quilting and Piecing Machine with Automatic Thread Trimmer and Speed Control​
More Product Pictures
SKU: TL-2010Q
Weight: 1 lbs
Vendor: JUKI
Our Price: $999.99   Market Price: $1699.00
Save: $699.01 per unit
Please, enter quantity for at least one product
Quantity unavailable. Try selecting a smaller quantity.
99¢ SHIPPING IN THE U.S.

JUKI TL-2010Q 1 Needle Lockstitch Mid-Arm Portable Quilting and Piecing Machine with Automatic Thread Trimmer and Speed Control

**May take up to 2 weeks for delivery.

The Juki TL-2010Q is a high-performance sewing and quilting machine. The TL-2010Q is a single needle, lock-stitch, portable machine, constructed of aluminum die-casting to ensure industrial-quality sewing.  

With advanced features, such an industrial sub-tension system, variable speed control slider, and bright white LED lighting, this machine is built for precision sewing. With a large work area of up to 23 inches (with auxiliary table attached), the TL-2010Q can handle large quilt, sewing or home decor project with ease.

MACHINE FEATURES:

JUKI 2010Q Foot Controller

FOOT CONTROLLER WITH THREAD TRIMMING FUNCTION:

It is possible to automatically trim both needle and bobbin threads by pressing the heel side of foot controller.  The foo controller is big enough and it is easy to control sewing start and stop.

JUKI 2010Q LED Light


TRULY ILLUMINATING LED LIGHT:

The bright-white LED lighting, provides an illuminated view of the sewing area and allows for more precise sewing and material handling.

JUKI 2010Q Sub Tension Unit




SUB TENSION UNIT:

Even if strongly twisted thread should be used, the unit will avoid "return of twist of thread" and supply needle thread to the main tension unit without thread quivering.  It helps sewers created even stitches with stable thread tension.

Juki 2010Q Maximum Sewing Speed Control


MAXIMUM SEWING SPEED CONTROL:

The new speed control lever gives you complete control over sewing speed. Set the speed from 200 to 1500 stitches per minute, or any speed in between for free motion, and precision sewing.  This is ideal for free motion quilting or when fixed sewing speed is required for your sewing techniques.

JUKI 2010Q Predetermined Stop Postion Of The Needle

PREDETERMINED STOP POSITION OF THE NEEDLE:

When you stop sewing, the machine will com too and accurate stop with the needle down.  To move the needle up or down as desired, simply press the needle up/down button.  WHen the button is pressed continuously, the machine sews stitch by stitch at low speed.

JUKI 2010Q Knee Lifter Lever

KNEE LIFTER LEVER:

The knee lifter ever allows you to lift or lower the presser foot without you hands.  The presser foot an be raised as high as 12mm, so that light to heavy weight materials are handled easily.




TWO TYPES OF QUILTING FOOT/DROP FEED:

JUKI Two Type of Quilting Foot Drop Feed

The quilting feet are designed for free motion quilting and free-hand embroidery.  Two types of quilting feet are supplied as standard accessories with the machine. A 1/5 Quilting Foot is used for basic quilting and the 1/4 Quilting Foot for precision sewing with 1/4 inch stitch width.

The feed dog can be raised and lowered simply by depressing a switch.  When quilting, the drop feed allows you to sew curved stitches with ease. These quilting feet are designed for free motion quilting and free-hand embroidery. Just lower the feed dogs and stitch away.

JUKI 2010Q Automatic Thread Trimmer

AUTOMATIC THREAD TRIMMER:

The automatic thread trimming device simultaneously trims needle and bobbin threads at sewing end by pressing the push-button, using the same thread trimming mechanism as our industrial sewing machines. Trims thin to thick threads without fail. Auto thread trimming may be activated by the foot controller. 

JUKI TL-2010Q Juki Even Feed Foot

JUKI EVEN FEED FOOT:

With its reliable feed, the even feed foot ensures the machine's ability to produce beautiful seams when sewing difficult-to-feed fabrics such as georgette and velvets, as well as heavy weight materials such as leather.

JUKI 2010Q Heavy-Weight Materials Are Sewn With Ease


HEAVY-WEIGHT MATERIALS ARE SEWN WITH EASE:

The speed control mechanism, operated by microcomputer, allows the machine to sew materials at low speeds. This provides for accurate feed and perfect stitching when sewing heavy weight fabrics, quilting and multiple layers of materials. 

TL-2010Q Automatic Needle Threader

AUTOMATIC NEEDLE THREADER:

The machine is equipped with an automatic thread button that simultaneously trims the needle and bobbin threads at the sewing end by lightly pressing the push-button. Both the trim button and the foot controller engage the advanced Juki industrial style thread trimming mechanism.


TL-2010Q Thread Tension Scale

THREAD TENSION SCALE:

The machine is provided with the thread tension scale, which allows you to adjust the tension according to the thread and material to be used. Stitch length is easily adjusted with a dial. 



TL-2010Q Easy Bobbin Replacement

EASY BOBBIN REPLACEMENT: 

A new bobbin case latch and an enlarged bobbin case area make it easier to remove and replace the bobbin. When the auxiliary table is being utilized, it is equipped with a sliding plate that allows convenient access to remove and load bobbins as well. 

JUKI TL-2010Q Adjustment Of Presser Foot Presser


ADJUSTMENT OF PRESSER FOOT PRESSER:

Presser foot pressure can be adjusted according to the fabric being sewn by turning a regulator located on the top of the machine. The pressure amount can then be viewed at a pressure indicator.