Yamato DT Series Feed-off-the-arm 3 Needle Double Chain Stitch Machine With Table and Servo Motor

About the DT Series 

Designed for felling operation of heavyweight garments such as denim pants, denim jackets, working wear, etc. The combination of differential feed and upper-driven roller ensures ideal feeding performance in felling operation.

Yamato Model DT-30, Feed-off-the-Arm, 3 Needle Double Chain Stitch Machine is designed for the felling operation of heavyweight garments such as denim pants, denim jackets, working wear, etc.
Differential feed mechanism and exclusively designed upper-driven feed roller feeds materials accurately and evenly. It ensures a twist-free beautiful finish even on very thick parts like the crotch seam of denim pants, etc.
Unique bed shape (feed-off-the-arm) eliminates turning operation after felling operation.

MACHINE APPLICATIONS:

For Lap Seaming of Heavy Weight Fabric

MACHINE FEATURES:

• Designed for felling operation of heavy-weight garments
• Ensures twist-free beautiful finish even on the very thick part
• Unique bed shape eliminates turning operation after felling operation
• Looper comes out for easy threading
• Introduction for smooth feeding performance
• Differential ratio can be adjusted by turning a dial

DOWNLOADS:

• Brochure DT-30
• Instruction Manual DT-30 
• Parts List DT-30

U.S. WARRANTY:

90 Days labor on defects in materials and workmanship.

** Head Only option does not include the table, legs, Servo Motor, and LED Lamp. No assembly or residential charges necessary.

DISCLAIMER: DUE TO THE WEIGHT AND SHIPPING METHODS USED FOR INDUSTRIAL MACHINES THEY MAY EXPERIENCE MARRING AND SCRATCHES DURING SHIPPING. THIS WILL NOT AFFECT THE OPERATION OF THE MACHINE.

THE ADVANTAGES OF A SERVO MOTOR:

• They use up to 90% less power than clutch motors
• They are 1/3 lighter than clutch motors
• With a flick of the switch, you can reverse motor rotation
• No parts to wear out or adjust.
• No matter how hard you press the foot pedal configured speed remains the same

Because of the Servo motor speed control, most users find the machine easier to use. Both beginning and seasoned sewers find this feature helpful when stitching projects that don't demand high-speed stitching.

MACHINE DEVICES:

• FDL-4
  • Air-operated Pressor Foot Lifter for DT series.
• AC17
  • AC17 automatically cuts thread chains both at the beginning and the end of seaming.
  • Applicable for: FD series flat-seamers
• AC1
  • Pneumatic Thread Chain Cutter at the Beginning and the End of Seaming for FD series and DT series.
  • No longer need scissors
  • AC device cuts thread chains by pressing the pedal or the knee switch.
  • Ease of use
  • Just press the pedal or the knee switch (depending on motor spec.) at the end of sewing and AC cuts the thread chains.
  • Ready for any thread chains
  • AC devices can cut very thick thread chains as well as soft thin thread chains. Thanks to the chopper-type cutting mechanism, it is excellent in the durability of the cutting parts
  • Can be fitted to the machines in use
  • AC devices can be fitted to your machines in use. It improves your productivity and operators' fatigue.
  • Configurations and composition of AC devices vary depending on applicable models (FD or DT) and specifications of the motor.
  • Applicable for: FD series & DT series