Fill out the form below to find out when more arrives!
The JUKI LU-1508NH
Extra Heavy Duty Single Needle Unison Feed Lockstitch Machine With Vertical-axis Large Hook Comes With Table, Legs, Servo Motor and LED Lamp
The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needle-bar stroke of 38mm and long 190R needle, the machine supports the sewing of extra heavy materials. The machine comes with an extra large steel hand-wheel with a diameter as large as φ175.
Application: Extra Heavy-Weight
Max. Sewing Speed: 2,000 Stitches per Minute
Max. Stitch Length: 10mm (forward/backward)
Needle Bar Stroke: 38mm
Lift of the Presser Foot by Knee: 16mm
Alternating Vertical Movement: 2.5~6.5mm
Thread: #20～#1, B69～B207, Nm=40/3～8/3
Thread Take-Up: Slide Type
Needle (at the time of delivery): Standard 190R or 135x17(Nm180) Nm125~Nm200
Lubrication Oil: Juki New Defrix Oil No.2 (equivalent to ISO VG32)
Distance from needle to machine arm: 255mm
Bed Size: 517mm x 178mm
Weight of the Machine Head: 44.5kg
THE ADVANTAGES OF A SERVO MOTOR:
They use up to 90% less power than clutch motors
They are 1/3 lighter than clutch motors
With a flick of the switch you can reverse motor rotation
No parts to wear out or adjust.
No matter how hard you press the foot pedal configured speed remains the same
Because of Servo motor speed control, most users find the machine is easier to use. Both beginning and seasoned sewers find this feature helpful when stitching projects that don't demand high-speed stitching.